23 research outputs found

    206 The time course of new T-wave ECG descriptors following single and double dose administration of Sotalol in healthy subjects

    Get PDF
    IntroductionThe aim of the study was to assess the time course effect of IKr blockade on ECG biomarkers of ventricular repolarization and to evaluate the accuracy of a fully automatic approach for QT duration evaluation.Methods12-lead digital ECG Holter were recorded in 38 healthy subjects (27 males, mean age=27.4±8.0 years) on baseline conditions (day 0) and after administration of 160 mg (day 1) and 320 mg (day 2) of d-l Sotalol. For each 24-hour period and each subject, ECGs were extracted every 10 minutes during the 4-hour period following drug dosage. Ventricular repolarization was characterized using 3 biomarker categories: conventional ECG time intervals, Principal Component Analysis (PCA) analysis on the T-wave, and fully automatic biomarkers computed from a mathematical model of the T-wave.ResultsQT interval was significantly prolonged starting 1h20 minutes after drug dosing with 160 mg and 1h 10 minutes after drug dosing with 320 mg. PCA ventricular repolarization parameters sotalol-induced changes were delayed (>3 hours). After sotalol dosing, the early phase of the T-wave changed earlier than the late phase prolongation. Globally, the modeled surrogate QT paralleled manual QT changes.The duration of manual QT and automatic surrogate QT were strongly correlated (R2=0.92, p<0.001). The Bland & Altman plot revealed a non-stationary systematic bias (bias =26.5ms ±1.96*SD = 16ms).ConclusionsChanges in different ECG biomarkers of ventricular repolarization display different kinetics after administration of a potent potassium channel blocker. These differences need to be taken into account when designing ventricular repolarization ECG studies

    T-wave axis deviation, metabolic syndrome and cardiovascular risk: results from the MOLI-SANI study

    Get PDF
    Early recognition of patients at increased cardiovascular risk is a major challenge. The surface electrocardiogram provides a useful platform and it has been used to propose several indexes. T wave axis abnormality is associated with an increased risk of cardiovascular mortality, independently of other risk factors and can be associated with the presence of the metabolic syndrome (MetS). We assessed the prevalence of T axis abnormalities and its relationship with MetS and its components in a large population of Italian adults. Data concerning 11,143 women (54±11years) and 9742 men (55±11years) randomly recruited from a general population (Moli-sani cohort) were analyzed. After excluding subjects with incomplete data and with history of cardiac disease or left ventricular hypertrophy, T-wave axis was normal in 74.5% of men and 80.9% of women, borderline in 23.6% and 17.3% and abnormal in 1.9% and 1.8%. In subjects with MetS, the prevalence of borderline or abnormal T-wave axis deviation was higher than in subjects without MetS (in men: 26.6% vs. 22.1% and 2.5% vs. 1.7%; in women: 25% vs. 15% and 2.4% vs. 1.6%, respectively for borderline and abnormal levels, pb0.0001). Each component of MetS increased the odds of having borderline or abnormal T-wave axis deviation by 1.21 in men and 1.31 in women. T wave axis deviation is associated with MetS and its individual components. These findings confirm previous reported results, expanding them to a large and representative sample of European population of Caucasian ethnicity

    T-wave axis deviation, metabolic syndrome and estimated cardiovascular risk in men and women of the MOLI-SANI Study

    Get PDF
    Aim: We aimed at investigating the association between T-wave axis deviation, metabolic syndrome (MetS), its components and estimated risk of cardiovascular disease (CVD) at 10 years in a adult Italian population. Methods: 11,143 women (54±11 years) and 9,742 men (55±11 years) were analysed from the Molisani cohort, randomly recruited from the general population. MetS was defined using the ATPIII criteria. T-wave axis deviation was measured from the standard 12-lead resting electrocardiogram. CVD risk in ten years was estimated by the CUORE score. Results: 29% of men and 27% of women with MetS showed borderline or abnormal T-wave as compared to 24% and 17% without MetS (p<0.0001 for both genders). Among components of MetS, elevated waist and blood pressure were strongly associated with Twave axis deviation, whereas glucose, HDL and triglycerides were only marginally. The odds of having borderline or abnormal T-wave axis deviation in multivariable regression analysis, was 1.38 (95% CI:1.25-1.53) in MetS men and 1.68 (95% CI:1.51-1.87) in MetS women compared to those without. Further adjustment for MetS components completely abolished the associations. Abnormal T-wave axis deviation was associated with an increased risk of CVD in 10 years in men (OR=4.4; 95% CI:1.10-17.9). Conclusion: T-wave axis deviation is strongly associated with components of the MetS, in particular high waist circumference and blood pressure and with an increased CVD risk, particularly in men. ECG monitoring to identify T-wave axis deviation in obese, hypertensive or MetS subjects can be an early indicator of vascular disease and help in reducing cardiac events

    Comparison of automated interval measurements by widely used algorithms in digital electrocardiographs

    Get PDF
    Background: Automated measurements of electrocardiographic (ECG) intervals by current-generation digital electrocardiographs are critical to computer-based ECG diagnostic statements, to serial comparison of ECGs, and to epidemiological studies of ECG findings in populations. A previous study demonstrated generally small but often significant systematic differences among 4 algorithms widely used for automated ECG in the United States and that measurement differences could be related to the degree of abnormality of the underlying tracing. Since that publication, some algorithms have been adjusted, whereas other large manufacturers of automated ECGs have asked to participate in an extension of this comparison. Methods: Seven widely used automated algorithms for computer-based interpretation participated in this blinded study of 800 digitized ECGs provided by the Cardiac Safety Research Consortium. All tracings were different from the study of 4 algorithms reported in 2014, and the selected population was heavily weighted toward groups with known effects on the QT interval: included were 200 normal subjects, 200 normal subjects receiving moxifloxacin as part of an active control arm of thorough QT studies, 200 subjects with genetically proved long QT syndrome type 1 (LQT1), and 200 subjects with genetically proved long QT syndrome Type 2 (LQT2). Results: For the entire population of 800 subjects, pairwise differences between algorithms for each mean interval value were clinically small, even where statistically significant, ranging from 0.2 to 3.6 milliseconds for the PR interval, 0.1 to 8.1 milliseconds for QRS duration, and 0.1 to 9.3 milliseconds for QT interval. The mean value of all paired differences among algorithms was higher in the long QT groups than in normals for both QRS duration and QT intervals. Differences in mean QRS duration ranged from 0.2 to 13.3 milliseconds in the LQT1 subjects and from 0.2 to 11.0 milliseconds in the LQT2 subjects. Differences in measured QT duration (not corrected for heart rate) ranged from 0.2 to 10.5 milliseconds in the LQT1 subjects and from 0.9 to 12.8 milliseconds in the LQT2 subjects. Conclusions: Among current-generation computer-based electrocardiographs, clinically small but statistically significant differences exist between ECG interval measurements by individual algorithms. Measurement differences between algorithms for QRS duration and for QT interval are larger in long QT interval subjects than in normal subjects. Comparisons of population study norms should be aware of small systematic differences in interval measurements due to different algorithm methodologies, within-individual interval measurement comparisons should use comparable methods, and further attempts to harmonize interval measurement methodologies are warranted

    Effectiveness of cardiac resynchronization therapy in heart failure patients with valvular heart disease: comparison with patients affected by ischaemic heart disease or dilated cardiomyopathy. The InSync/InSync ICD Italian Registry

    Get PDF
    AimsTo analyse the effectiveness of cardiac resynchronization therapy (CRT) in patients with valvular heart disease (a subset not specifically investigated in randomized controlled trials) in comparison with ischaemic heart disease or dilated cardiomyopathy patients.Methods and resultsPatients enrolled in a national registry were evaluated during a median follow-up of 16 months after CRT implant. Patients with valvular heart disease treated with CRT (n = 108) in comparison with ischaemic heart disease (n = 737) and dilated cardiomyopathy (n = 635) patients presented: (i) a higher prevalence of chronic atrial fibrillation, with atrioventricular node ablation performed in around half of the cases; (ii) a similar clinical and echocardiographic profile at baseline; (iii) a similar improvement of LVEF and a similar reduction in ventricular volumes at 6-12 months; (iv) a favourable clinical response at 12 months with an improvement of the clinical composite score similar to that occurring in patients with dilated cardiomyopathy and more pronounced than that observed in patients with ischaemic heart disease; (v) a long-term outcome, in term of freedom from death or heart transplantation, similar to patients affected by ischaemic heart disease and basically more severe than that of patients affected by dilated cardiomyopathy.ConclusionIn 'real world' clinical practice, CRT appears to be effective also in patients with valvular heart disease. However, in this group of patients the outcome after CRT does not precisely overlap any of the two other groups of patients, for which much more data are currently available

    Nouvel outil rapide, précis et facile à enseigner de mesure du QT par concaténation d’ECG tripliqués

    No full text
    International audienceBackgroundThe gold standard method for assessing the QTcF (QT corrected for heart rate by Fridericia's cube root formula) interval is the “QTcF semiautomated triplicate averaging method” (TAM), which consists of measuring three QTcF values semiautomatically, for each 10-second sequence of a triplicate electrocardiogram set, and averaging them to get a global and unique QTcF value. Thus, TAM is time consuming. We have developed a new method, namely the “QTcF semiautomated triplicate concatenation method” (TCM), which consists of concatenating the three 10-second sequences of the triplicate electrocardiogram set as if they were a single 30-second electrocardiogram, and measuring QTcF only once for the triplicate electrocardiogram set.AimTo compare the TCM method with the TAM method.MethodsFifty triplicate electrocardiograms were read twice by an expert and a student using both methods (TAM and TCM). We plotted Bland–Altman plots to assess agreement between the two methods, and to compare the student and expert results. The time needed to read a set of 20 consecutive triplicate electrocardiograms was measured.ResultsLimits of agreement between TAM and TCM ranged from −8.25 to 6.75 ms with the expert reader. TCM was twice as fast as TAM (17.38 versus 34.28 min for 20 consecutive triplicate electrocardiograms). Bland–Altman plots comparing student and expert results showed limits of agreement ranging from −4.34 to 11.75 ms for TAM, and −1.2 to 8.0 ms for TCM.ConclusionsTAM and TCM show good agreement for QT measurement. TCM is less time consuming than TAM. After a learning session, an inexperienced reader can measure the QT interval accurately with both methods.ContextLa méthode de référence de mesure de l’intervalle QT est la « QT/QTcF semi-automated triplicate averaging method » (TAM). Elle consiste à mesurer semi-automatiquement 3 valeurs de QTcF issues de chacun des enregistrements électrocardiographiques (ECG) de 10 secondes enregistrés en triplicata, puis à en faire la moyenne afin d’obtenir une valeur unique de QTcF. Cette méthode est chronophage. Nous avons développé une méthode récente –la « QT/QTcF semi-automated triplicate concatenation method » (TCM), consistant en concaténer les 3 séquences de 10 secondes de l’ECG acquis en triplicata comme s’il s’agissait d’un seul ECG de 30 secondes, puis à mesurer une seule fois le QTcF.ObjectifNous avons comparé la méthode TCM à la méthode TAM.Méthodes50 ECG tripliqués ont été lus par un expert et un étudiant, en utilisant les 2 méthodes (TAM et TCM). Une analyse de Bland-Altman a été réalisée afin d’évaluer la concordance de ces méthodes, et celles des mesures d’un expert comparé à un étudiant. Le temps nécessaire pour mesurer 20 ECG tripliqués a été mesuré.RésultatsPour l’expert, les limites d’agrément à 95 % entre TAM et TCM s’étendent de −8,25 à 6,75 ms. Entre l’étudiant et l’expert, les limites d’agrément sont de −4,34 à 11,75 ms avec la TAM, et de −1,2 à 8,0 ms avec la TCM. La TCM est deux fois plus rapide que la TAM.ConclusionsLes méthodes TAM et TCM sont concordantes pour la mesure du QT, la méthode TCM étant cependant plus rapide que la méthode TAM. Après apprentissage, un étudiant est capable de mesurer le QT précisément avec chacune de ces méthodes
    corecore